TODO list

This section contains a list of smaller janitorial tasks in the kernel DRM graphics subsystem useful as newbie projects. Or for slow rainy days.

Subsystem-wide refactorings

De-midlayer drivers

With the recent drm_bus cleanup patches for 3.17 it is no longer required to have a drm_bus structure set up. Drivers can directly set up the drm_device structure instead of relying on bus methods in drm_usb.c and drm_pci.c. The goal is to get rid of the driver’s ->load / ->unload callbacks and open-code the load/unload sequence properly, using the new two-stage drm_device setup/teardown.

Once all existing drivers are converted we can also remove those bus support files for USB and platform devices.

All you need is a GPU for a non-converted driver (currently almost all of them, but also all the virtual ones used by KVM, so everyone qualifies).

Contact: Daniel Vetter, Thierry Reding, respective driver maintainers

Switch from reference/unreference to get/put

For some reason DRM core uses reference/unreference suffixes for refcounting functions, but kernel uses get/put (e.g. kref_get/put()). It would be good to switch over for consistency, and it’s shorter. Needs to be done in 3 steps for each pair of functions:

  • Create new get/put functions, define the old names as compatibility wrappers
  • Switch over each file/driver using a cocci-generated spatch.
  • Once all users of the old names are gone, remove them.

This way drivers/patches in the progress of getting merged won’t break.

Contact: Daniel Vetter

Convert existing KMS drivers to atomic modesetting

3.19 has the atomic modeset interfaces and helpers, so drivers can now be converted over. Modern compositors like Wayland or Surfaceflinger on Android really want an atomic modeset interface, so this is all about the bright future.

There is a conversion guide for atomic and all you need is a GPU for a non-converted driver (again virtual HW drivers for KVM are still all suitable).

As part of this drivers also need to convert to universal plane (which means exposing primary & cursor as proper plane objects). But that’s much easier to do by directly using the new atomic helper driver callbacks.

Contact: Daniel Vetter, respective driver maintainers

Clean up the clipped coordination confusion around planes

We have a helper to get this right with drm_plane_helper_check_update(), but it’s not consistently used. This should be fixed, preferrably in the atomic helpers (and drivers then moved over to clipped coordinates). Probably the helper should also be moved from drm_plane_helper.c to the atomic helpers, to avoid confusion - the other helpers in that file are all deprecated legacy helpers.

Contact: Ville Syrjälä, Daniel Vetter, driver maintainers

Implement deferred fbdev setup in the helper

Many (especially embedded drivers) want to delay fbdev setup until there’s a real screen plugged in. This is to avoid the dreaded fallback to the low-res fbdev default. Many drivers have a hacked-up (and often broken) version of this, better to do it once in the shared helpers. Thierry has a patch series, but that one needs to be rebased and final polish applied.

Contact: Thierry Reding, Daniel Vetter, driver maintainers

Convert early atomic drivers to async commit helpers

For the first year the atomic modeset helpers didn’t support asynchronous / nonblocking commits, and every driver had to hand-roll them. This is fixed now, but there’s still a pile of existing drivers that easily could be converted over to the new infrastructure.

One issue with the helpers is that they require that drivers handle completion events for atomic commits correctly. But fixing these bugs is good anyway.

Contact: Daniel Vetter, respective driver maintainers

Better manual-upload support for atomic

This would be especially useful for tinydrm:

  • Add a struct drm_rect dirty_clip to drm_crtc_state. When duplicating the crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in __drm_atomic_helper_crtc_duplicate_state().
  • Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm_ prefix ofc and using drm_fb_. drm_framebuffer.c makes sense since this is a function useful to implement the fb->dirty function.
  • Create a new drm_fb_dirty function which does essentially what e.g. mipi_dbi_fb_dirty does. You can use e.g. drm_atomic_helper_update_plane as the template. But instead of doing a simple full-screen plane update, this new helper also sets crtc_state->dirty_clip to the right coordinates. And of course it needs to check whether the fb is actually active (and maybe where), so there’s some book-keeping involved. There’s also some good fun involved in scaling things appropriately. For that case we might simply give up and declare the entire area covered by the plane as dirty.

Contact: Noralf Trønnes, Daniel Vetter

Fallout from atomic KMS

drm_atomic_helper.c provides a batch of functions which implement legacy IOCTLs on top of the new atomic driver interface. Which is really nice for gradual conversion of drivers, but unfortunately the semantic mismatches are a bit too severe. So there’s some follow-up work to adjust the function interfaces to fix these issues:

  • atomic needs the lock acquire context. At the moment that’s passed around implicitly with some horrible hacks, and it’s also allocate with GFP_NOFAIL behind the scenes. All legacy paths need to start allocating the acquire context explicitly on stack and then also pass it down into drivers explicitly so that the legacy-on-atomic functions can use them.
  • A bunch of the vtable hooks are now in the wrong place: DRM has a split between core vfunc tables (named drm_foo_funcs), which are used to implement the userspace ABI. And then there’s the optional hooks for the helper libraries (name drm_foo_helper_funcs), which are purely for internal use. Some of these hooks should be move from _funcs to _helper_funcs since they are not part of the core ABI. There’s a FIXME comment in the kerneldoc for each such case in drm_crtc.h.
  • There’s a new helper drm_atomic_helper_best_encoder() which could be used by all atomic drivers which don’t select the encoder for a given connector at runtime. That’s almost all of them, and would allow us to get rid of a lot of best_encoder boilerplate in drivers.

Contact: Daniel Vetter

Get rid of dev->struct_mutex from GEM drivers

dev->struct_mutex is the Big DRM Lock from legacy days and infested everything. Nowadays in modern drivers the only bit where it’s mandatory is serializing GEM buffer object destruction. Which unfortunately means drivers have to keep track of that lock and either call unreference or unreference_locked depending upon context.

Core GEM doesn’t have a need for struct_mutex any more since kernel 4.8, and there’s a gem_free_object_unlocked callback for any drivers which are entirely struct_mutex free.

For drivers that need struct_mutex it should be replaced with a driver- private lock. The tricky part is the BO free functions, since those can’t reliably take that lock any more. Instead state needs to be protected with suitable subordinate locks or some cleanup work pushed to a worker thread. For performance-critical drivers it might also be better to go with a more fine-grained per-buffer object and per-context lockings scheme. Currently the following drivers still use struct_mutex: msm, omapdrm and udl.

Contact: Daniel Vetter, respective driver maintainers

Core refactorings

Use new IDR deletion interface to clean up drm_gem_handle_delete()

See the “This is gross” comment – apparently the IDR system now can return an error code instead of oopsing.

Clean up the DRM header mess

Currently the DRM subsystem has only one global header, drmP.h. This is used both for functions exported to helper libraries and drivers and functions only used internally in the drm.ko module. The goal would be to move all header declarations not needed outside of drm.ko into drivers/gpu/drm/drm_*_internal.h header files. EXPORT_SYMBOL also needs to be dropped for these functions.

This would nicely tie in with the below task to create kerneldoc after the API is cleaned up. Or with the “hide legacy cruft better” task.

Note that this is well in progress, but drmP.h is still huge. The updated plan is to switch to per-file driver API headers, which will also structure the kerneldoc better. This should also allow more fine-grained #include directives.

In the end no .c file should need to include drmP.h anymore.

Contact: Daniel Vetter

Add missing kerneldoc for exported functions

The DRM reference documentation is still lacking kerneldoc in a few areas. The task would be to clean up interfaces like moving functions around between files to better group them and improving the interfaces like dropping return values for functions that never fail. Then write kerneldoc for all exported functions and an overview section and integrate it all into the drm book.

See https://dri.freedesktop.org/docs/drm/ for what’s there already.

Contact: Daniel Vetter

Hide legacy cruft better

Way back DRM supported only drivers which shadow-attached to PCI devices with userspace or fbdev drivers setting up outputs. Modern DRM drivers take charge of the entire device, you can spot them with the DRIVER_MODESET flag.

Unfortunately there’s still large piles of legacy code around which needs to be hidden so that driver writers don’t accidentally end up using it. And to prevent security issues in those legacy IOCTLs from being exploited on modern drivers. This has multiple possible subtasks:

  • Extract support code for legacy features into a drm-legacy.ko kernel module and compile it only when one of the legacy drivers is enabled.

This is mostly done, the only thing left is to split up drm_irq.c into legacy cruft and the parts needed by modern KMS drivers.

Contact: Daniel Vetter

Make panic handling work

This is a really varied tasks with lots of little bits and pieces:

  • The panic path can’t be tested currently, leading to constant breaking. The main issue here is that panics can be triggered from hardirq contexts and hence all panic related callback can run in hardirq context. It would be awesome if we could test at least the fbdev helper code and driver code by e.g. trigger calls through drm debugfs files. hardirq context could be achieved by using an IPI to the local processor.
  • There’s a massive confusion of different panic handlers. DRM fbdev emulation helpers have one, but on top of that the fbcon code itself also has one. We need to make sure that they stop fighting over each another.
  • drm_can_sleep() is a mess. It hides real bugs in normal operations and isn’t a full solution for panic paths. We need to make sure that it only returns true if there’s a panic going on for real, and fix up all the fallout.
  • The panic handler must never sleep, which also means it can’t ever mutex_lock(). Also it can’t grab any other lock unconditionally, not even spinlocks (because NMI and hardirq can panic too). We need to either make sure to not call such paths, or trylock everything. Really tricky.
  • For the above locking troubles reasons it’s pretty much impossible to attempt a synchronous modeset from panic handlers. The only thing we could try to achive is an atomic set_base of the primary plane, and hope that it shows up. Everything else probably needs to be delayed to some worker or something else which happens later on. Otherwise it just kills the box harder, prevent the panic from going out on e.g. netconsole.
  • There’s also proposal for a simplied DRM console instead of the full-blown fbcon and DRM fbdev emulation. Any kind of panic handling tricks should obviously work for both console, in case we ever get kmslog merged.

Contact: Daniel Vetter

Clean up the debugfs support

There’s a bunch of issues with it:

  • The drm_info_list ->show() function doesn’t even bother to cast to the drm structure for you. This is lazy.
  • We probably want to have some support for debugfs files on crtc/connectors and maybe other kms objects directly in core. There’s even drm_print support in the funcs for these objects to dump kms state, so it’s all there. And then the ->show() functions should obviously give you a pointer to the right object.
  • The drm_info_list stuff is centered on drm_minor instead of drm_device. For anything we want to print drm_device (or maybe drm_file) is the right thing.
  • The drm_driver->debugfs_init hooks we have is just an artifact of the old midlayered load sequence. DRM debugfs should work more like sysfs, where you can create properties/files for an object anytime you want, and the core takes care of publishing/unpuplishing all the files at register/unregister time. Drivers shouldn’t need to worry about these technicalities, and fixing this (together with the drm_minor->drm_device move) would allow us to remove debugfs_init.

Contact: Daniel Vetter

Better Testing

Enable trinity for DRM

And fix up the fallout. Should be really interesting ...

Make KMS tests in i-g-t generic

The i915 driver team maintains an extensive testsuite for the i915 DRM driver, including tons of testcases for corner-cases in the modesetting API. It would be awesome if those tests (at least the ones not relying on Intel-specific GEM features) could be made to run on any KMS driver.

Basic work to run i-g-t tests on non-i915 is done, what’s now missing is mass- converting things over. For modeset tests we also first need a bit of infrastructure to use dumb buffers for untiled buffers, to be able to run all the non-i915 specific modeset tests.

Contact: Daniel Vetter

Create a virtual KMS driver for testing (vkms)

With all the latest helpers it should be fairly simple to create a virtual KMS driver useful for testing, or for running X or similar on headless machines (to be able to still use the GPU). This would be similar to vgem, but aimed at the modeset side.

Once the basics are there there’s tons of possibilities to extend it.

Contact: Daniel Vetter

Driver Specific

tinydrm

Tinydrm is the helper driver for really simple fb drivers. The goal is to make those drivers as simple as possible, so lots of room for refactoring:

  • backlight helpers, probably best to put them into a new drm_backlight.c. This is because drivers/video is de-facto unmaintained. We could also move drivers/video/backlight to drivers/gpu/backlight and take it all over within drm-misc, but that’s more work.
  • spi helpers, probably best put into spi core/helper code. Thierry said the spi maintainer is fast&reactive, so shouldn’t be a big issue.
  • extract the mipi-dbi helper (well, the non-tinydrm specific parts at least) into a separate helper, like we have for mipi-dsi already. Or follow one of the ideas for having a shared dsi/dbi helper, abstracting away the transport details more.
  • tinydrm_lastclose could be drm_fb_helper_lastclose. Only thing we need for that is to store the drm_fb_helper pointer somewhere in drm_device->mode_config. And then we could roll that out to all the drivers.
  • tinydrm_gem_cma_prime_import_sg_table should probably go into the cma helpers, as a _vmapped variant (since not every driver needs the vmap). And tinydrm_gem_cma_free_object could the be merged into drm_gem_cma_free_object().
  • tinydrm_fb_create we could move into drm_simple_pipe, only need to add the fb_create hook to drm_simple_pipe_funcs, which would again simplify a bunch of things (since it gives you a one-stop vfunc for simple drivers).
  • Quick aside: The unregister devm stuff is kinda getting the lifetimes of a drm_device wrong. Doesn’t matter, since everyone else gets it wrong too :-)
  • With the fbdev pointer in dev->mode_config we could also make suspend/resume helpers entirely generic, at least if we add a dev->mode_config.suspend_state. We could even provide a generic pm_ops structure with those.
  • also rework the drm_framebuffer_funcs->dirty hook wire-up, see above.

Contact: Noralf Trønnes, Daniel Vetter

Outside DRM